v
BASIC MANUAL
■ Unique functions
This section introduces unique functions built into the ID-50A/ID-50E.
L See the Advanced manual or “About the DV Gateway function” that can be downloaded
from the Icom website for more details.
1
DV Gateway function
Even if you cannot access a D-STAR repeater, you can make a direct Gateway call
through the Internet.
NOTE:
• A Global IP connection is necessary for your Windows or Android device.
• Download and install the RS-MS3W or RS-MS3A application software from the Icom
website or Google Play.
• See “About the DV Gateway function” that can be downloaded from the Icom website for details.
Terminal mode
The Terminal mode enables you to make a direct Gateway call through the Internet
using a USB cable and a Windows or Android device.
Access Point mode
The Access Point mode enables a D-STAR transceiver to make a Gateway call through
an ID-50A/ID-50E using a USB cable and a Windows or Android device.
IMPORTANT: Before you set up an access point, check any regulations or laws in your country.
INTERNETINTERNET
INTERNETINTERNET
To Next Page
Loading...
