EasyManua.ls Logo

Icom ID-800H

Icom ID-800H
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
1 DIGITAL MODE OPERATION
New2001
Received call sign
When a call in digital voice mode is received, the calling sta-
tion and using repeater call signs being used can be stored
into the received call record. The stored call signs are view-
able in the following manner.
DD
Desired call record indication
q
Push [SET•LOCK]
to enter call sign set mode.
Rotate [DIAL] to select CALLS if necessary.
w Push
[SET•LOCK]
or [S.MW•MW] several times to select
the received call indication.
•“RXCALL, RXRPT1, and RXRPT2 are available for the re-
ceived station, repeater 1 and repeater 2 call signs, respectively.
e To conrm the received call, push [BAND•MODE] to enter
the received call sign indication mode.
Push [SET•LOCK] or [S.MW•MW] to display last 6-digit or rst
6-digit of the call sign, respectively.
When RXCALL is selected in step w, the additional note can
be displayed by pushing [BAND•MODE].
Push [BAND•MODE] once or twice to exit the indication mode.
r Push one of [TONE•T-SCAN•BK], [LOW•DUP] or
[MONI•DTMF•EMR] to exit call sign set mode.
z Push [
SET
B(D-OFF)] to enter call sign set mode.
Push [
YY
] or [
ZZ
] to select CALLS, if necessary.
x Push [
SET
B(D-OFF)] or [
ENT
C(T-OFF)] several
times to select the received call indication.
•“RXCALL, RXRPT1 and RXRPT2 are available for
the received station call sign, repeater 1 and repeater
2 call sign, respectively.
c To confirm the received call, push [BAND] to
enter the received call sign indication mode.
When RXCALL is selected in step x, the additional
note can be displayed by pushing [BAND].
v Push [
CLR
A(MW)] to exit call sign set mode.
For your information
By selecting MyCALL, UrCALL, RPT1 C or RPT2 C at
step w as at above left, the programmed call sign can also
be displayed for conrmation.
[DIAL] rotation is necessary to select the desired call sign
channel in this case.
NOTE: The record is cleared once turning power OFF, or
overwritten when another call is received.
SET
B
ID-800H_FirmupInfo.qxd 05.10.27 9:08 Page 14 (1,1)

Other manuals for Icom ID-800H

Related product manuals