24
2 OTHER FUNCTIONS
New2001
■ [F-1]/[F-2] keys on HM-133
In addition to the current band condition, the set call signs
(“UrCALL,” “RPT1 C” and “RPT2 C”) and the condition of the set
mode and initial set mode settings can also be memorized
into [F-1] and [F-2] keys
([FUNC] must be pushed before pushing
[F-1]/[F-2]) with the firmware update.
The memorized call signs are independent from the call sign
memory as well as the temporary setting for operation.
Programming the condition
➥ Push [FUNC] then push and hold [F-1] or [F-2] for 1 sec.
Recalling the condition
➥ Push [FUNC] then push [F-1] or [F-2] momentarily.
NOTE: The initialization of these keys is no longer avail-
able from the HM-133 key operation.
ID-800H_FirmupInfo.qxd 05.10.27 9:08 Page 24 (1,1)
To Next Page
Loading...
