Icom ID-800H

87
11
DIGITAL MODE OPERATION
■ Pocket beep operation
This function uses a digital code/call sign for calling and can
be used as a “common pager” to inform you that someone
has called while you were away from the transceiver. The dig-
ital code or digital call sign squelch does not function while in
a low-speed data communication.
D Waiting for a call from a specific station
qSet the operating frequency.
wProgram the digital code or call sign.
• See p. 99, “Digital code setting,” or pgs. 61, 62, “Call sign pro-
gramming” and p. 65, call sign setting.
ePush [TONE•T-SCAN•BK] several times until “SCSQL”
or “SDSQL” is displayed to turn ON the pocket beep
with digital code squelch or digital call sign squelch, re-
spectively.
Appears when the pocket
beep with digital code
squelch is activated.
Appears when the pocket
beep with digital call sign
squelch is activated.
ID-800H_1.qxd 2007.06.14 3:09 PM Page 87