Icom IP503H - Page 15

2
BASIC OPERATION
2-6
■ Using the Call history (continued)
CLR
LOG
SET
Deleting history logs:
1. While holding down [FUNC], turn ON the power.
2. Release [FUNC] when “SET” is displayed.
3. Push [FUNC] or [Address] several times to select “LOG.”
4. Push [▲]/[▼] to select “CLR,” then push [Call history].
• All the histories except the recorded audio are deleted.
LSee page 3-9 for deleting the recorded audio.
– – –
LOG
SET
[電源/音量]ツマミ
[FUNC]キー
[▲]/[▼]キー
[履歴]キー
[▲]/[▼]
[FUNC]
[PWR/VOL]
[Call history]
[Address]