5
OPTIONAL PRODUCTS
5-7
■ Insert the transceiver into the BC-218
■ Charging with the optional BC-218
The BC-218 is designed to rapidly charge the BP-272 Li-ion
battery pack.
Charging indicator
Orange: Charging
Green: Charged
Battery pack
Transceiver +
Battery pack
Optional CP-22 or CP-23L
can be used.
Power adapter
BC-207S*
To an AC
outlet
You can insert and charge a transceiver that has the belt clip attached. Attach
the belt clip, then insert the transceiver into the BC-218 until it is locked in place.
Approximate charging time
BP-272: 2.1 hours (when charging the battery pack only)
L Charging time may differ, depending on the using
conditions of the transceiver while charging.
NOTE:
• The rapid charger, BC-218 has a charging timer that
stops charging after approximately 5 hours has passed.
• If the battery pack does not properly charge when
it is attached to the transceiver, remove it from the
transceiver and insert only the battery pack into the
charger.
• After charging is completed, the BC-218 will
automatically recharge a battery pack when the battery
voltage decreases. When the battery pack is often left in
the BC-218 for long periods of time, the battery life cycle
will be shortened.
* May not be supplied, or the shape may differ, depending on the charger version.
Belt clip
BC-218
To Next Page
Loading...
