Icom IP503H - Using the Call History

2
BASIC OPERATION
2-5
2
Hold down [PTT]
While holding down [PTT], speak into the microphone.
• The [TX/RX] indicator lights red.
■ Using the Call history
The [Call history] key can be used, depending on a preset. Ask your dealer for details.
1
Select a call-to party from the Call history
1. Push [Call history] to select a call history (
“RX log”).
L Push this key several times to select “TX log,” “RX log,” “TX MSG
log,” “RX MSG log,” “TX TEL log” or “RX TEL log.”
2. Push [▲]/[▼] to select a call-to party. (Example: Sales 8)
About the history log:
Up to 10 logs can be stored. The oldest log is automatically
deleted when the 11th call is received.
押し
つづける
[送信/受信]ランプ
が赤色に点灯
マイク
10/3 12:57
Sales group1
Tx log
10/3 13:37
Sales1
Rx log
10/2 11:47
Sales8
Rx log
Sales8
10/4 14:53
Individual call transmitting screen
[▲]/[▼]
キー
[履歴]
キー
Hold down
Microphone
Lights red
[Call history]
[▲]/[▼]