Icom IP503H - Selecting Talkgroup with FUNC Key; Selecting Talkgroup with Address Key

3
ADVANCED OPERATION
3-5
■ Selecting a Talkgroup number with the [FUNC] key
This function may be used only when the Talkgroup Call function is assigned to the [FUNC] key. Ask your dealer for details.
■ Selecting a Talkgroup number with the [Address] key
This function may be used only when the Talkgroup Call function is assigned to [Address] key. Ask your dealer for details.
1. Push [FUNC] to select “Talkgroup.”
2. Push [▲]/[▼] to select a Talkgroup number you want to
belong to. (Example: 20001)
3. Push [CLR/LOCK].
• The transceiver is ready to talk to only the transceivers that belong
to the same Talkgroup.
L While the Talkgroup number is selected, the Normal Group call
cannot be made. (p. 3-4)
L You can leave the Talkgroup and return to the Normal Group by
selecting “OFF” in Step 2 on the “Talkgroup” screen.
1. Push [Address] to select “Group.”
• Each push changes the Call type.
2. Push [▲]/[▼] to select a Talkgroup number you want to
belong to. (Example: 20001)
3. Push [CLR/LOCK].
• The transceiver is ready to talk to only the transceivers that belong
to the same Talkgroup.
L While the Talkgroup is selected, the Normal Group call cannot be
made. (p. 3-4)
L You can leave the Talkgroup and return to the Normal Group by
selecting “OFF” in step 2 on the “Talkgroup” screen.
“Talkgroup1” is selected
“Talkgroup1” is selected
OFF
Talkgroup
Talkgroup
Talkgroup1
20001
Talkgroup
Talkgroup1
20001
Talkgroup1
10/4 12:57
Talkgroup1
10/4 12:57
[▲]/[▼]キー
[ アドレ ス 帳 ] キー
[CLR/LOCK]キー
Group
10001
Sales1
[FUNC]
[CLR/LOCK]
[▲]/[▼]
[Address]
[CLR/LOCK]
[▲]/[▼]
[Address]