4
SET MODE
4-6
■ Setting item list (continued)
The shaded items (■ ■ ) are also displayed in the Basic Set mode.
LItems or default values may differ according to a presetting. Ask your dealer for details.
Item Description Option/range Default
Destination ID
Displays the call-to party (call type) on the stand-
by screen.
Call-to paty (call type)
L If "Disable" is selected, the call-to party (call
type) that is preset by your dealer is displayed
on the standby screen.
Disable, Transmit,
Transmit and Receive or
All Operations
Disable
Bluetooth Sets the Bluetooth function. Disable or Enable Disable
BT Auto Connect Automatically connects a Bluetooth device. Enable or Disable Enable
BT Sync Vol.
Sets the audio volume setting type for a Bluetooth
headset.
L When "Enable" is selected, the Bluetooth
headset volume can be set by [PWR/VOL].
Disable or Enable Disable
BT Connect Type
Sets the Synchronous Connection-Oriented
(SCO) link* connection type of a Bluetooth
headset.
When “Auto Disconnect” is selected, the SCO
link is automatically disconnected after two
seconds.
* A Bluetooth link for voice communication
L This setting is valid only when a Bluetooth
device other than VS-3 or BC-218 is used.
L When
this item is set to “Auto Disconnect,” the
VOX function is not usable.
Always Connect or Auto Dis-
connect
Always Con-
nect
PTT & Mic Switch
Enables the user to select which microphone to
use.
L When this item is set to “Auto,” Transmits the
audio from the device whose [PTT] is pushed.
Auto, Radio Mic or Bluetooth
Mic
Auto
BT Echo Canceller
Sets the Echo Cancelling function for a Bluetooth
headset.
Disable or Enable Enable
BT E-Cancel Gain
Sets the Echo Canceller input gain for a Blue-
tooth headset.
–40 dB ~ +40 dB 0 dB
BT E-Cancel Delay
Sets the Echo Canceller delay for a Bluetooth
headset.
0milliseconds ~ 160milliseconds
70millisec-
onds
BT Noise Cancel
Sets the Noise Cancelling function for a Blue-
tooth headset.
Disable or Enable Enable
BT Power Save
Sets the Power Save function for a Bluetooth
headset.
L When "Enable" is selected, the Power Save
function automatically activates after 2 minutes
of no communication.
• When a call is received, this function is
cancelled.
• This function is cancelled when pushing
[PTT]. Push [PTT] again to talk.
Enable or Disable Disable
To Next Page
Loading...
