Icom IP503H - Page 46

5
OPTIONAL PRODUCTS
5-9
■ Bluetooth
®
operation (continued)
Read the instructions following the procedures shown below.
HM-215/BC-218 description (p. 5-10) Charging VS-3
(p. 5-11)
Using BC-218 (Rapid Charger) Using VS-3 (Bluetooth Headset)
Pairing the IP501H/IP503H with the BC-218
1. Turning ON the Bluetooth function (p. 5-12)
2. Entering the Pairing mode (BC-218) (p. 5-13)
3. Searching for Bluetooth devices (p. 5-14)
Pairing the IP501H/IP503H with the VS-3
1. Turning ON the Bluetooth function (p. 5-12)
2. Enter the Pairing mode (VS-3) (p. 5-13)
3. Search for the Bluetooth devices (p. 5-14)
Connecting and disconnecting
•
Connecting operation on the BC-218 (p. 5-15)
•
Disconnecting the Bluetooth connection with the BC-218
(p. 5-18)
•
Selecting the disconnect device from the pairing list
(pp. 5-20 and 5-21)
Connecting and disconnecting
•
Connecting/Disconnecting (pp. 5-16 and 5-20)
Deleting a Bluetooth device from the pairing list (p. 5-21)
Initializing the pairing list (IP501H/IP503H) (p. 5-22)
Initializing the pairing list (BC-218) (p. 5-23) Initializing the pairing list (VS-3) (p. 5-24)
TIP:
You can configure the Bluetooth function In the Set mode.