Icom IP503H - Page 51

5
OPTIONAL PRODUCTS
5-14
3. Search for Bluetooth devices
1. While holding down [FUNC], turn ON the power.
• Enters the Set mode.
2. Release [FUNC] when “SET” is displayed.
3. Push [FUNC] several times to select “Search Bluetooth Device.”
4. Push [Call history].
• “Searching…” is displayed
• When Bluetooth devices are found, their device name and BD address
are displayed on the screen.
5. Push [▲]/[▼] to select a device, then push to [Call history].
• When the pairing has succeed, “Connect” is displayed.
• To retry the search, push [▲]/[▼] to select “Search,” then push [Call history].
6. Push [CLR/LOCK].
• Exits the Set mode.
■ Pairing the IP501H/IP503H with the BC-218 or VS-3 (continued)
– – –
LOG
SET
Search
Search BT Device
SET
Searching···
Search BT Device
SET
ICOM BT-000:00-00
SET
Connect
SET
[電源/音量]ツマミ
[FUNC]キー
[▲]/[▼]キー
[履歴]
キー
[CLR/LOCK]
キー
[PWR/VOL]
[FUNC]
[CLR/LOCK]
[Call history]
[▲]/[▼]