Icom IP503H - Page 57

5
OPTIONAL PRODUCTS
5-20
Disconnecting the VS-3 when the LED blinks blue
z Hold down the [PWR] button on the VS-3 for 3 seconds.
• Sounds a beep then melody (Scale goes down), and the Bluetooth connection between transceiver and VS-3 are
disconnected.
■ Connecting and disconnecting (continued)
All
10/4 12:57
Selecting the device to disconnect from the pairing list.
1. Push [FUNC] to select “Pairing List.”
2. Push [▲]/[▼] to select the Bluetooth device to disconnect.
3. Push [Call history].
• After few seconds, a beep sounds and the Bluetooth connection
between transceiver and the selected Bluetooth device is disconnected.
4. Push [CLR/LOCK].
• Returns to the standby screen.
ICOM BT-000:00-00
Connected
Pairing List
ICOM BT-000:00-00
Unconnected
Pairing List
[FUNC]キー
[▲]/[▼]キー
[CLR/LOCK]キー
[履歴]キー
The “ ” icon is no longer displayed
Earphone (3.5 (d) mm)
Example
L
R
LED
[PWR]
[Call history]
[FUNC]
[CLR/LOCK]
[▲]/[▼]
(Blinks blue)