18
4.1.5 Call from the Phonebook
- On Your ECLIPSE Handset
1. Press in standby mode.
2. Press / to select the desired entry in the phonebook
and then press
to dial out the selected phonebook number.
4.2 Answer and End a Call
1. When the phone rings, press on your ECLIPSE Handset
2. To end a conversation, press on your ECLIPSE Handset.
Warning: When the handset is ringing, please do not hold it too close to
your ear as the volume of the ringing tone may damage your hearing.
Note: You can simply place the ECLIPSE Handset back on its base station
or the ECLIPSE Handset back on its charging cradle to end the call,
provided you have not deactivated the Auto hang-up feature. (See Set
Auto Hang-up on page 44.)
4.3 Handset Speakerphone
During a call, you can press on your ECLIPSE Handset to alternate
between hands-free speakerphone and handset earpiece.
4.4 Adjust Earpiece Volume
There are 5 levels of earpiece volume on your ECLIPSE Handset.
1. During a call, press / to select from VOLUME 1 to
VOLUME 5 on your ECLIPSE Handset.
• The current setting is shown.
• When you end the call, the setting will remain at the last
selected level.
4.5 Adjust Speaker Volume
There are 5 levels of speaker volume on both the ECLIPSE Handset.
1. During a call, press / on your ECLIPSE Handset to
select from VOLUME 1 to VOLUME 5.
• The current setting is shown.
• When you end the call, the setting will remain at the last selected level.
To Next Page
Loading...
