50
11 ANSWERING MACHINE
Your phone includes a telephone answering machine that records
unanswered calls when it is on.
The answering machine can store up to 59 messages within the
maximum recording time of approximately 30 minutes and each message
can be up to 3 minutes long.
When the answering machine is on, calls are answered after the set RING
DELAY.
If you have selected RECORD MSGS (ECLIPSE Handset), then the caller
can leave you a message after hearing your announcement.
If you have selected ANSWER ONLY mode, the caller can only listen to
your announcement but cannot leave you a message.
If the answering machine memory is full, the answering machine LED
on the base flashes rapidly, the answering machine icon on the
ECLIPSE Handset flashes slowly, and the ANSWER ONLY
announcement will be played to new callers. You will have to delete
some messages before any new ones can be recorded.
11.1 Turning the Answering Machine On/Off
- On Your ECLIPSE Handset
1. From the home screen, press .
2. Press again to select ANS. SYSTEM.
3. Press / to ANS. ON/OFF and then press to
select.
4. Press / to select ON or OFF and then press to
confirm.
• A confirmation tone is played.
5. Press
to return to standby mode.
Note: If the answering machine is OFF and the Master PIN is still set at its
default 0000, the answering machine will not answer any incoming calls.
However, if the Master PIN has been changed and Remote Access is
activated, it will answer incoming calls after 14 rings to allow remote
access, and the ANSWER ONLY announcement will play. (See Remote
Access on page 59.)
To Next Page
Loading...
