26
6 PHONEBOOK
The ECLIPSE Handset can store up to 200 phonebook entries, Each
phonebook entry can have a maximum of 24 digits for the phone number
and 12 characters for the name.
6.1 Store a Contact in the Phonebook
- On Your ECLIPSE Handset
1. From the home screen, press .
2. Press / to PHONEBOOK and then press to
select.
3. Press to select NEW ENTRY.
• The screen displays ENTER NAME.
4. Enter the name of the contact (maximum 12 characters) using the
keypad.
If you make a mistake, press to delete the last character
entered.
5. Press to confirm the name entry.
• The screen displays ENTER NUMBER.
6. Enter the number of the contact (maximum 24 digits) using the
keypad.
Press to delete the last digit entered.
7. Press to confirm.
• A confirmation tone is played.
8. Press
to return to standby mode.
Note:
You cannot store a new phonebook entry when the memory is full. In this
case, you have to delete existing entries to make space for new ones.
When storing the number for a local call, you can enter only the 8-digit
local number without STD (area) code, and it will still display the name if
there is an incoming call and you subscribe to caller display.
To Next Page
Loading...
