38
8.2 Alarm Settings
An alarm can be set on a handset, to sound at a set time only once or
repeated each day.
When an alarm is set, the alarm icon is shown on the handset display.
When the alarm time is reached, the handset will flash -ALARM- on the
display and sound an alarm for 1 minute, at the same volume setting as
the handset ringer. If the ringer is off, it will ring at volume setting 1.
When the alarm rings, you can press any key on the handset to stop the
ringing, even if the keylock is activated.
- On Your ECLIPSE Handset
1. From the home screen, press .
2. Press / to CLOCK&ALARM and then press to
select.
3. Press / to ALARM and then press to select.
4. Press / to an alarm option.
OFF: Turn alarm off
ONCE: The alarm sounds once at the set time.
DAILY: The alarm sounds daily at the set time.
5. Press to select the option.
6. If ONCE or DAILY is selected, enter the hour and minute.
Press to select am, or press
- to select pm if the time is
in 12-hour format.
7. Press to confirm the alarm setting.
• A confirmation tone is played.
8. Press
to return to standby mode.
To Next Page
Loading...
