51
11.2 Answer Mode
The phone comes with two pre-recorded announcements for the
respective answer modes: ANSWER ONLY and RECORD MSGS on the
ECLIPSE Handset.
By default, the answer mode is RECORD MSGS on the ECLIPSE Handset,
which allows a caller to leave a message on the answering machine after
hearing the announcement. This can be changed to ANSWER ONLY mode,
which does not allow callers to leave any messages on the answering
machine after hearing the announcement.
11.2.1 Set Answer Mode
- On Your ECLIPSE Handset
1. From the home screen, press .
2. Press again to select ANS. SYSTEM.
3. Press / to ANSWER MODE and then press to
select.
4. Press / to select ANSWER ONLY or RECORD MSGS
and then press
to confirm.
• A confirmation tone is played.
5. Press
to return to standby mode.
To Next Page
Loading...
