iDect eclipse 8035 - Remote Access to Answering Machine; Activating;Deactivating Remote Access

53
11.3.2 Activate/Deactivate Remote Access
- On Your ECLIPSE Handset
1. From the home screen, press .
2. Press again to select ANS. SYSTEM.
3. Press / to ANS. SETTING and then press to
select.
2. Press / to REMOTE ACC. and then press to
select.
3. Press / to select ACTIVATE or DEACTIVATE and then
press
to confirm.
• A confirmation tone is played.
4. Press
to return to standby mode.
Note: Once the remote control access is activated, you can check the
messages on your answering machine when you are away from home, by
calling from another phone.
The Master PIN is used for accessing the answering machine remotely. If
your answering machine is off, you must change your Master PIN from its
default 0000 before you can use the remote access feature to turn on
your answering machine.