35
8 CLOCK AND ALARM SETTINGS
8.1 Date and Time Settings
If you have subscribed to the Calling Number Display (CND) service, the
time and date settings will be automatically updated by the network
when you receive an incoming call, but you may still need to set the
correct year.
You can also set the date and time manually.
- On Your ECLIPSE Handset
1. From the home screen, press .
2. Press / to CLOCK&ALARM and the press to
select.
3. Press again to select DATE & TIME.
• The last stored date is displayed, with the third digit of the year
flashing.
4. Enter the current date and press to confirm.
Enter 03 May 2012 as [1], [2], [0], [5], [0], [3](to change the date
format, see change the date format on page 37).
If you make a mistake, press to delete the last digit entered.
5. Enter the current time and press to confirm. The default time
format is 24 HOURS. (To change time format, see Change the Date
Format on page 36.)
For 24-hour format, enter 1:30pm as [1], [3], [3], [0].
For 12-hour format, enter the time and then press to select
am , or press
- to select pm.
Press to delete the last digit entered.
• A confirmation tone is played.
6. Press
to return to standby mode.
To Next Page
Loading...
