46
10.3 Deregister your Handset
You can deregister the handset you are using, or any other handset
registered to the same base. The default Master PIN is 0000.
- Using Your ECLIPSE Handset
1. From the home screen, press .
2. Press / to SETTINGS and then press to select.
3. Press / to DEREGISTER and then press to
select.
4. Enter the Master PIN and then press to confirm.
5. Press / to select the handset number you want to
deregister and then press to confirm, or press to cancel
the deregistration procedure.
Note: After confirming the handset you want to remove on either the
ECLIPSE Handset,
• A confirmation tone is played to indicate successful
deregistration.
• PLS REG H/S is displayed on the home screen of the
unregistered handset.
• During steps 1-5,
i
f no handset key is pressed within 10
seconds, the procedure will abort and the handset returns to
standby mode.
To Next Page
Loading...
