24
5 DIRECT ACCESS MEMORY
In addition to the phonebook memory, there are 2 direct access
memories (Keys 1 & 2) on all handsets. A long press on the keys in
standby mode will automatically dial the stored phone number.
5.1 Add Direct Access Memory
- On Your ECLIPSE Handset
1. From the home screen, press .
2. Press / to PHONEBOOK and then press to
select.
3. Press / to DIRECT MEM. and then press to
select.
4. Press / to KEY 1 or KEY 2 and then press to
select.
• The stored name is displayed, or NO NUMBER if it is empty.
5. Press to enter the DIRECT MEM. menu to add/edit the name
or number.
6. Press again to select EDIT NUMBER.
• The display shows the currently stored name or just ENTER
NAME if it is empty.
7. Edit or enter the name of your contact and press .
If you make a mistake, press to delete the last character
entered.
• The display shows the currently stored number or just ENTER
NUMBER if it is empty.
8. Edit or enter the number of your contact and press .
If you make a mistake, press to delete the last digit entered.
• A confirmation tone is played.
9. Press to return to standby mode.
To Next Page
Loading...
