19
4.6 Muting the Microphone
When the microphone is muted, the handset displays MUTE ON, and
your caller cannot hear you.
During a call, press (ECLIPSE Handset) to turn on/off the
microphone.
4.7 Paging
The paging feature enables you to locate a missing handset if the handset
is in range and contains charged batteries.
1. Press the key under the base unit.
• All the registered handsets that are in range will start to ring.
You can stop the paging by pressing any key on a handset or the key
under the base unit again.
4.8 Handset On/Off Power
Press and hold on your ECLIPSE Handset for more than 2 seconds
to power the handset on or off in standby mode.
• When first turned on, the display shows SEARCHING… until the
handset finds the base.
Note: You can switch the handset off to save battery life, if the handset is
not on the base or a charging cradle and you do not want to use it for a
while.
IMPORTANT: When the handset is OFF, it cannot be used for making calls
including emergency calls. It will not ring when there is an incoming call.
To answer a call, you will need to switch it back on and it may take some
time for the handset to re-connect a radio link with the base unit.
4.9 To Lock/Unlock the Keypad
You can lock the keypad on your ECLIPSE Handset to avoid making calls
or pressing the keys accidentally.
1. In standby mode, press and hold for 1 second to lock the keypad.
• The handset displays KEYS LOCKED.
2. To turn the keypad lock off, press and hold again.
Note: Incoming calls can still be answered even if the keypad is locked.
To Next Page
Loading...
