61
1. Using a tone-dialling phone, dial your home number.
2. While your announcement is playing, press
# key immediately.
3. Key in your Remote Access Code. (Default value is 0000.)
For details on how to set a new code, see
Change the Master
PIN on page 47 of the User Guide.
Note: The # can be entered at any time after the announcement starts, and the
Remote Access Code should follow without any delay. If the Remote Access Code
is entered incorrectly twice consecutively, the call will end automatically.
4. Refer to the key operations on the reverse side of this card.
Note: If your answering machine is off, but with Remote Access activated (See
Activate/Deactivate Remote
Access on page 53 of the User Guide) and Master
To Next Page
Loading...
