IDTECH Kiosk V - Get Module Version Information (09-20)

ID TECH Kiosk V User Manual
Page | 24
Response Frame
Byte 0-9
Byte 10
Byte 11
Byte 12
Byte 13
Byte 14
Byte 15
Header Tag & Protocol
Version
Cmd status
Length
(MSB)
Length
(LSB)
CRC
(LSB)
CRC
(MSB)
ViVOtech2\0 D0h
See Key
Manager
status codes
00h 00h Calculated Calculated
10.3. Get Module Version Information (09-20)
The Get Module Version Information command retrieves the reader’s module information.
Command Frame
Response Frame
If there is an error, the reader returns the appropriate status code with an empty data field (Data
Length = 0000h).
The format for module version information returned is “human readable,” consisting of fields
separated by commas and lines separated by carriage return and line feed characters:
<module type>,<module name and spec. version>,[<implementation
version>],<CRLF>
The following example shows the module version information subcommand and the information
being returned (in ASCII format).
Command: Get Module Version Information: 56 69 56 4F 74 65 63 68 32 00 09 20 00
00 56 11
Byte 0-9 Byte 10 Byte 11 Byte 12 Byte 13 Byte 14 Byte 15
Header Tag &
Protocol
Command
Sub-
Command
Data Length
(MSB)
Data Length
(LSB)
CRC
(LSB)
CRC
(MSB)
ViVOtech2\0 09h 20h 00h 00h
Byte 0-9 Byte 10 Byte 11 Byte12 Byte 13
Byte 14 …
Byte 13+n
Byte
14+n
Byte 15+n
Header Tag &
Protocol
Command Status Code
Data
Length
(MSB)
Data
Length
(LSB)
Data
CRC
(MSB)
CRC
(LSB)
ViVOtech2\0 09h
See Status
Code Table
See below