IDTECH Kiosk V - Get Serial Number (12-01)

ID TECH Kiosk V User Manual
Page | 25
Response:
56 69 56 4F 74 65 63 68 32 00 09 00 00 A6 4E 75 74 74 58 2D 31 30 2E
32 2E 30 0D 0A 77 6F 6C 66 53 53 4C 2D 34 2E 37 2E 30 0D 0A 43 4C 20
41 49 44 2C 20 45 4D 56 20 45 50 20 76 32 2E 31 30 2C 20 76 31 2E 30
30 0D 0A 43 4C 20 41 49 44 2C 20 4D 61 73 74 65 72 20 43 32 20 76 32
2E 31 30 0D 0A 43 4C 20 41 49 44 2C 20 56 43 50 53 20 76 32 2E 32 2C
20 76 31 2E 30 30 0D 0A 43 4C 20 41 49 44 2C 20 44 69 73 63 6F 76 65
72 20 44 50 41 53 20 32 2E 30 2C 20 76 31 2E 30 30 0D 0A 43 4C 20 4C
31 2C 20 45 4D 56 33 2E 31 61 2C 20 76 35 2E 32 33 0D 0A 65 29
ASCII translation of the data field:
NuttX-10.2.0<CR><LF>
wolfSSL-4.7.0<CR><LF>
CL AID, EMV EP v2.10, v1.00<CR><LF>
CL AID, Master C2 v2.10<CR><LF>
CL AID, VCPS v2.2, v1.00<CR><LF>
CL AID, Discover DPAS 2.0, v1.00<CR><LF>
CL L1, EMV3.1a, v5.23<CR><LF>
10.4. Get Serial Number (12-01)
The Get Serial Number command instructs the ViVOpay reader to return the 15-digit serial number
stored in its non-volatile memory. If a serial number has not been previously set in the reader, this
command fails with a Command Not Allowed error status. If the command frame is not valid, the
reader returns an error response frame.
Command Frame
Byte 0-9
Byte 10
Byte 11
Byte 12
Byte 13
Byte 14
Byte 15
Header Tag &
Protocol
Version
Command
Sub-
Command
Data
Length
(MSB)
Data
Length
(LSB)
CRC (LSB) CRC (MSB)
ViVOtech2\0
12h
01h
00h
0Fh
The serial number will be returned tail-padded with 0x30 to a length of 15
Response Frame
Byte 0-9 Byte 10 Byte 11 Byte 12 Byte 13
Byte 14 …
Byte 14+n-1
Byte 14+n Byte 15+n
Header Tag
& Protocol
Version
Command Status Code
Data
Length
(MSB)
Data
Length
(LSB)
Data CRC (MSB)
CRC
(LSB)
ViVOtech2\0 12h
See Status
Code Table
00h 0Fh
15-digit Serial
Number