１８
ACCURA9/9L INSTRUCTION MANUAL
7.3.3 D.SAMP function setting screen
This screen operates to memorize the sampling data for each channel into ROM and to set the empty alarm
function. In case of selecting ‘level compensation’, all functions can be set. In case of selecting other than
‘level compensation’, only the condition for vacuum data at Top-Level can be memorized into ROM.
LCD SCREEN
D.Samp.FunctionSettingScreen
***D.SampMenu***
Ch00BotLevelNOD
TopLevelNOD
EmpLevelOFF
Ｃｈ
・・・
C
urrent selected channel.
Ｂｏｔ＿Ｌｅｖｅｌ・・・
Down-load the sampling data at bottom level into ROM and set the
function.
（※１）
Ｔｏｐ＿Ｌｅｖｅｌ・・・
Down-load the sampling data at top level into ROM and set the function.
（※１）
Down-load the sampling data for vacuum into ROM at other than ‘level
compensation’.
（※２）
Ｅｍｐ＿Ｌｅｖｅｌ・・・
Down-load the empty level and set the function.
（※３）
（※１）
ON : Function set
OFF : Function set off
NOD : No sampling data to be memorized.
（※２）
Except the level compensation, NOD is always shown no matter what the memorized data is.
（※３）
ON : Function set
OFF : Function set off
To Next Page
Loading...
Need help?
General