GB
4 - HANDLING AND INSTALLATION MASTER 880MP E-volution
4 - Pag. 16 / 17
4.5 LUBRICATING OIL - FILLING
CAUTION:
wear personal protections
according to the
regulations in force.
• Pour the oil directly into the tank
and check the level through the
relevant indicator (A).
Oil characteristics: Class C - CKB
150, amount 80 l.
See paragraph 2.6. for the
comparative table.
4.6 ELECTRIC CONNECTION
DANGER - WARNING:
this type of operation should only be entrusted to skilled technical staff to
comply with the applicable standards and statutory regulations in force.
The feeder must be electrically connected to the lathe, which in turn, must be
connected to the plant wiring system in compliance with the applicable
regulations in force.
The feeder is normally provided with a multiple plug to plug into the special lathe outlet; refer
to the "Wiring diagram" if necessary.
To Next Page
Loading...
