IFM ecomatController CR720S - 8�1�2 Test Standards and Regulations

29
UK
8.1.2 Test standards and regulations
ifm electronic gmbh ● Friedrichstraße 1 ● 45128 Essen We reserve the right to make technical alterations without prior notice! 22/01/2020CR720S / page 4
CR720S Technical data
Control systems
Test standards and regulations
CE marking EN IEC 62061 Safety of machinery - Functional safety of electrical,
electronic and programmable safety-related control
systems
EN 61000-6-2 Electromagnetic compatibility (EMC)
Immunity
EN 61000-6-4 Electromagnetic compatibility (EMC)
Emission
EN 61010 Safety requirements for electrical equipment for
measurement, control and laboratory use
E1 marking UN/ECE-R10 Noise emission
Noise immunity with 100 V/m
Electrical tests ISO 7637-2 Pulse 1, severity level: IV; function state C
Pulse 2a, severity level: IV; function state A
Pulse 2b, severity level: IV; function state C
Pulse 3a, severity level: IV; function state A
Pulse 3b, severity level: IV; function state A
Pulse 4, severity level: IV; function state A
Pulse 5, severity level: III; function state A
(data valid for the 24 V system)
Pulse 4, severity level: III; function state A
(data valid for the 12 V system)
Climatic tests EN 60068-2-30 Damp heat, cyclic
Upper temperature 55 °C, number of cycles: 6
EN 60068-2-78 Damp heat, steady state
Test temperature 40 °C / 93 % RH
Test duration: 21 days
EN 60068-2-52 Salt spray test
Severity level 3 (vehicle)
Mechanical tests ISO 16750-3 Test VII; vibration, random
Mounting location: vehicle body
EN 60068-2-6 Vibration, sinusoidal
10���500 Hz; 0�72 mm/10 g; 10 cycles/axis
ISO 16750-3 Bump
30 g/6 ms; 24,000 shocks
Safety-related tests IEC 61508 parts 1-7 Functional safety of electrical/electronic/programma-
ble electronic safety-related systems
EN 62061 Safety of machinery - Functional safety of electrical,
electronic and programmable safety-related control
systems
Chemical resistance ISO 16750-5 AA, BA, BD, CC, DB, DC, DD,
only one chemical permitted at a time