Ihse Draco U-Switch - Summary of Keyboard Commands; Command Mode; Starting and Exiting the Command Mode; Changing, Resetting, and Deleting the Hot Key

Draco U-Switch Summary of Keyboard Commands
47
8 Summary of Keyboard Commands
Keyboard commands are fixed to the position of the keys on the keyboard. Keyboard mapping tables may
vary for country
-specific layouts.
Note the key position of keys when changing the keyboard layout, e.g., from QWERTZ to AZERTY with the
French keyboard la
yout.
In the following you find a summary of keyboard commands that can be used in conjunction with the
U-Switch.
8.1 Command Mode
8.1.1 Starting and Exiting the Command Mode
Keyboard command Function
2x Left Shift
Start the command mode (Hot Key, factory setting)
Esc
Exit the command mode
8.1.2 Changing, Resetting, and Deleting the Hot Key
Keyboard Command Function
Hot Key, c, new Hot
Key code, Enter
Change the Hot Key according to the predefined Hot Key Code table.
Hot Key, c, 0, new
Hot Key, Enter
Define a freely selectable Hot Key.
Right Shift + Del
within 5 s after
switching on the
CON Unit or plugging in
a keyboard
Reset the Hot Key back to default settings.
Hot Key Code
Hot Key Code Hot Key
0
Freely selectable, except
Esc
,
Del
and
Enter
2
2x Scroll
3
2x Left Shift
4
2x Left Ctrl
5
2x Left Alt
6
2x Right Shift
7
2x Right Ctrl
8
2x Right Alt