The device does not contain parts that can be repaired directly by the user. In the event of malfunctioning, do not
attempt to carry out any type of maintenance operation. If you find or suspect any kind of system malfunctioning, do
not attempt to carry out any type of maintenance operation and do not use the system on a patient, but directly
contact your local distributor.
The user may not carry out maintenance on any mechanical or electronic part of the x-ray system.
Opening the cases to access the internal circuits may cause device breakage and failure of the electrical safety
devices and will lead to forfeiture of the warranty.
Any maintenance, repairs and modifications of the device must be carried out only by personnel directly authorised
by the manufacturer or by third parties expressly authorised by the manufacturer and must be carried out according
to the laws in force and the generally accepted technical standards.
All the system components must be checked and replaced, if necessary, by qualified personnel.
For any maintenance operation, please contact the manufacturer via the website indicated on the cover of this
manual by filling in the Information Request form.
Should you for any reason need to return the device or its parts to the manufacturer or a Technical Service centre,
disinfect all the external parts of the device using a specific product (see the paragraph “Cleaning and disinfection”)
and preferably return it in its original packaging.
At the end of its lifetime, dispose of the device in accordance with the regulations in force. It is also advisable to
disinfect all the external parts of the device before disposal and to separate the materials for differentiated waste
collection.
In accordance with Directives 2002/95/EC, 2002/96/EC and 2003/108/EC regarding reduced use of dangerous
substances in electrical and electronic devices as well as waste disposal, do not dispose of the devices in the
household waste but collect them separately.
When purchasing a new device of an equivalent type, one for one, the device that has come to the end of its lifetime
should be returned to the dealer for disposal.
As regards reuse, recycling and other forms of recovery of the above mentioned waste, the manufacturer carries out
the functions defined in the individual national legislations.
Appropriate differentiated waste collection for subsequent recycling treatment and environmentally friendly disposal
contributes to preventing possible negative effects on the environment and health and encourages recycling of the
materials of which the device is made up.
The crossed-out bin symbol on the device indicates that the product must be collected separately from other waste at
the end of its useful life.
To Next Page
Loading...
