49 Image Vault
®
PRO Command
Host Name
When connecting remotely a user may specify either the IP Address of the DVR or its Host Name. The default Host Name will be the
DVR’s serial number, though you may change this as desired. Changing the host name will require the DVR to be rebooted before the
change will take e ect.
Network Throughput
By default the DVR will transmit images upon request of Playback users. Your DVR transmits video and audio in small packets as re-
quested by the remote PC. Throughput may be restricted by unchecking Fastest Speed Possible and entering a value for Max Through-
put.
8.2 Location Setup
Access Location Setup by selecting “Location Setup” from the Edit Params submenu of the Status menu. The Client and Location
elds in the Location dialog are displayed above the camera list in Playback. This information is handy for reference purposes, but not
required. The “Time Zone” and “Daylight Savings” options allow you to adjust your system to the local environment. By default the
system clock is set to Paci c Time.
To Next Page
Loading...
