This program sets the maximum charge capacity
that will be supplied to the battery during charge.
If the delta-peak voltage is not detected nor the
safety timer expired by any reason, this feature
will automatically stop the process at the
selected capacity value.
The beep sounds at every time pressing the
buttons to confirm your action. The beep or
melody sounded at various times during
operation to alert different mode changes. These
audible sounds can be turned on or off.
INCDEC
DEC
INC
DEC
INC
INCDEC
DEC
INC
DEC
INC
DEC
INC
INCDEC
10
To Next Page
Loading...
