IMC C SERIES User Manual

© 2018 imc Test & Measurement GmbH
imc C-SERIES - Manual, Version 4 R 3 - 2018-10-19
138 Technical Specs
Voltage measurement
Parameter
Value typ.
min. / max.
Remarks
Input ranges
±50 V, ±25 V, ±10 V, ±5 V,
±2.5 V, ±1 V, ..., ±5 mV
Gain error
0.02%
£ 0.05%
of display range, at 25°C
Gain drift
+20 ppm/K ×D T
a
+80 ppm/K ×D T
a
D T
a
=|T
a
-25°C| ambient temperature T
a
Offset error
0.02%
£ 0.05%
£ 0.06%
of the input range, at 25°C
> ± 50 mV
£ ± 50 mV
Offset drift
±60 µV/K ×D T
a
±0.06 µV/K ×D T
a
±100 µV/K ×D T
a
±0.3 µV/K ×D T
a
>±10 V
£ ±10 V
CMRR (common mode
rejection ratio)
Input ranges: ±50 V to ±10 V
Input ranges: ±5 V to ±50 mV
Input ranges: ±25 mV to ±5 mV
62 dB
92 dB
120 dB
>46 dB
>84 dB
>100 dB
common mode voltage (DC..60 Hz):
±50 V
±10 V
±10 V
Noise
DC coupling
14 nV/ Ö Hz
1 kHz
0.4 µV
rms
bandwidth 0.1 Hz to 1 kHz
Constant current supply
Parameter
Value typ.
min. / max.
Remarks
ICP current sources
4.2 mA/channel
±10%
Compliance voltage
25 V
>24 V
Source impedance
280 kΩ
>100 kΩ
The description of the CS-3008-FD.
1
ICP is a registered trade mark of PCB Piezotronics Inc., Delta Tron is a registered trade mark of Bruel & Kjaer Sound and
Vibration; PIEZOTRON, PIEZOBEAM is a registered trade mark of Kistler
2
Only galvanically insulated sensors. For more detailed information, please refer to chapter "MMI-TEDS" in imc CRONOS manual.
92

IMC C SERIES Specifications

General

Brand	IMC
Model	C SERIES
Category	Measuring Instruments
Language	English