EasyManua.ls Logo

Imerge NP200 - Product Specifications; General and Amplifier Specs; Tuner Specs and Accessories

Imerge NP200
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
SPECIFICATIONS
–
GeneralGeneral
GeneralGeneral
General
Clock precision monthly error ±30 seconds (25°C/77°F)
Power supply ......................................... AC 120V, 60Hz
Power consumption ........................58 W (120V, 60Hz)
Standby power ......................................................... 8W
Dimensions .........205mm(W) x 91mm(H) x 279 mm(D)
Weight .................................................................. 3.9kg
–
Amplifier SectionAmplifier Section
Amplifier SectionAmplifier Section
Amplifier Section
••
••
• Power output
FTC ........15 watts per channel, min RMS, at 8 W, both
channels driven 1kHz, with no more than 0.1%
DIN ......................................... 2 x 17 watts at 6Ω, 1kHz
2 × 15 watts at 8Ω, 1kHz
Dynamic power output ................... 2 × 27 watts at 6Ω
2 × 24 watts at 8Ω
Total harmonic distortion ...........0.1% at rated power
IM distortion ................................0.6% at rated power
Damping factor .............................................. 30 at 8W
• Input Sensitivity and Impedance
TAPE/MD PLAY ........................................ 150mV, 50kΩ
LINE IN ...................................................... 150mV, 50kΩ
Frequency and response ....... 10 to 50,000Hz +0 /–3dB
Signal to noise ratio ............................... 100dB (IHF-A)
Muting ................................................................. –60dB
–
Tuner SectionTuner Section
Tuner SectionTuner Section
Tuner Section
• Tuning range
U.S. & Canadian models
FM: ............................87.50–108.00MHz(100kHz steps)
AM: .................................... 530–1710kHz (10kHz steps)
Other area models
FM: ..............................87.5–108.00 MHz (50kHz steps)
AM: ...................................... 522–1611kHz (9kHz steps)
• Usable sensitivity
FM:
Mono ......... 11.2dBf, 1.0µV (75Ω IHF), 0.9µV (75Ω DIN)
Stereo ..... 17.2dBf, 2.0µV (75 Ω IHF), 23.0µV (75Ω DIN)
AM .......................................................................... 30µV
• 50dB Quieting sensitivity
FM:
Mono ........................................... 17.2dBf, 2.0µV (75Ω)
Stereo ......................................... 37.2dBf, 20.0µV (75Ω)
• Capture ratio
FM ......................................................................... 2.0dB
• Image rejection ratio
FM:
U.S. & Canadian models ........................................ 40dB
Other area models ................................................ 85dB
AM .......................................................................... 40dB
• IF rejection ratio
FM .......................................................................... 90dB
AM .......................................................................... 40dB
• Signal to noise ratio
FM .......................... Mono 73dB, IHF; Stereo 67dB, IHF
AM .......................................................................... 40dB
• Selectivity
FM ........................ 50dB DIN (±300kHz at 40kHz Devi.)
AM Suppression Ratio ........................................... 50dB
• Harmonic distortion
FM:
Mono ...................................................................... 0.2%
Stereo ..................................................................... 0.3%
AM ......................................................................... 0.7 %
• Frequency response
FM .............................................. 30–15,000Hz (±1.5dB)
• Stereo separation
FM ............ 45dB at 1,000Hz, 30dB at 100 to 10,000Hz
• Stereo threshold
FM ................................................ 17.2dBf, 2.0µV (75Ω)
––
––
–
AccessoriesAccessories
AccessoriesAccessories
Accessories
Infrared remote control .............................................. 1
Batteries for the remote control ................................ 2
Antenna for receiving AM broadcasts ....................... 1
Antenna for receiving FM broadcasts ........................ 1
Note
The specifications and design of this product is subject
to change without notice.