Imerge NP200 - Changing the Volume; Muting the Sound; Selecting an Input Source; Source Selection Methods

9
CHANGING THE VOLUME
To change the volume
• Use the
VOLUME VOLUME
VOLUME VOLUME
VOLUME / keys on the NP200 or
remote control.
The volume display appears when a
VOLUME VOLUME
VOLUME VOLUME
VOLUME / key is
pressed and disappears after 2 seconds or immediately
any other key is pressed.
To mute the sound
• Press the
MUTE MUTE
MUTE MUTE
MUTE key on the remote control.
MUTING MUTING
MUTING MUTING
MUTING is displayed on the NP200.
• Press the
MUTE MUTE
MUTE MUTE
MUTE key again to turn the sound back
on.
You can also turn the sound back on by pressing the
VOLUMEVOLUME
VOLUMEVOLUME
VOLUME / key.
SELECTING A SOURCE
To select a source
• Press the
AUDIO INPUT AUDIO INPUT
AUDIO INPUT AUDIO INPUT
AUDIO INPUT key to switch between
the available input sources as follows:
Source Description
FM FM radio
AM AM radio
AUX Phono input; eg MiniDisc player.
SERVER SoundServer
iNet Radio Internet radio
You can also select any source directly by pressing the
appropriate source key on the remote control.
• Press the
TUNER TUNER
TUNER TUNER
TUNER key to toggle between FM and
AM.
SWITCHING ON AND OFF
When power is connected to the NP200, the following
display appears:
• Press the
STANDBYSTANDBY
STANDBYSTANDBY
STANDBY/
ON ON
ON ON
ON key on the NP200 or
remote control to turn on the power.