16 Crane Reference
IMT 5005i / 6006i - Manual # 99904387
bottom of the base. Move the chassis under the crane and lower the crane into the desired position. Install
the 1-8x3” mounting cap screws (item # 15), 1” nuts (item #16) and 1” washers (item #17) to secure the crane
(94 kg-m).
NOTE:
The 1-8 x 3” grade 8 zinc coated capscrews are designed for a crane box thickness of 7/8” to 1” only. A different
crane box may require different capscrews. All mounting capscrews must be grade 8 zinc coated of proper length.
Failure to use proper length capscrews could cause the bolts to bottom out before torqued.
To Next Page
Loading...
Need help?
General
