Parts 26 Section 4
IMT 5005i / 6006i - Manual # 99904387
Parts Information
GENERAL
This section contains the exploded parts drawings and accompanying parts lists for the assemblies used on this
crane. These drawings are intended to be used in conjunction with the instructions found in the maintenance and
repair manuals for this crane family. For optional equipment such as winches and remote controls, refer to the
appropriate service manual.
CRANE IDENTIFICATION
crane base. When ordering parts, communicating warranty information, or referring to the unit in correspondence,
Iowa Mold Tooling Co., Inc.
Box 189, Garner, IA 50438-0189
WARNING
Do not attempt to repair any component
without reading the information contained in
the repair section. Pay particular attention to
statements marked Warning, Caution or
Note in that section. Failure to comply with
these instructions may result in damage to
the equipment, personal injury or death.
MODEL
NUMBER
SERIAL
NUMBER
MFG
DATE
IOWA MOLD TOOLING CO., INC.
BOX 189, GARNER, IA 50438-0189
To Next Page
Loading...
Need help?
General
