Inficon VGC501 - Page 40

40 tina96e1-b (2016-12) VGC501_VGC502_VGC503.om
For linear analog gauges, the full scale (F.S.) value has to be defined on the basis
of the connected gauge type. For linear digital gauges and logarithmic gauges it is
automatically recognized.
Available for the following gauges:
 Pirani
(PSG)
 Pirani / Capacitance (PCG)
 Cold cathode
(PEG, MAG)
 Cold cathode / Pirani
(MPG)
 Hot ionization / Pirani
(BPG, HPG)
 Capacitance
(CDG)
 Hot ionization / Pirani / Capacitance
(BCG)
Value
FSR I
e.g. FSR 1000 MBAR I  0.01 mbar, 0.02 mbar, 0.05 mbar
0.01 Torr, 0.02 Torr, 0.05 Torr
0.10 mbar, 0.25 mbar, 0.50 mbar
0.10 Torr, 0.25 Torr, 0.50 Torr
1 mbar, 2 mbar, 5 mbar
1 Torr, 2 Torr, 5 Torr
10 mbar, 20 mbar, 50 mbar
10 Torr, 20 Torr, 50 Torr
100 mbar, 200 mbar, 500 mbar
100 Torr, 200 Torr, 500 Torr
1000 mbar, 1100 mbar
1000 Torr
2 bar, 5 bar, 10 bar, 50 bar
A conversion table can be found in the
Appendix (→  102).
Measuring range (F.S.) of
linear gauges