Inficon XL3000flex - Operating Elements on the Handle

INFICON Description | 4
XL3000flex-Operating-instructions-jina83en1-07-(2105) 19 / 108
4.4.2 Operating elements on the handle
The display of the handle displays part of the information of the main display.
Fig.1: Sniffer line SL3000XL
The leak rate is shown as a bar graph and displayed numerically. The unit of
measurement is the same as in the main display.
The display also shows the gas type and the tracer gas concentration. If the
XL3000flex is operated in the high flow operation mode, then the gas type display has
a dark background.
Warning or error messages are shown on the display. The message is confirmed with
the right button. The right button can otherwise be used to switch between low flow
and high flow.
The left button can be used for a ZERO-adjustment: The background display is set
toZERO by pressing the key.
The sniffer probe is equipped with LEDs for work in dimly lit places.
WARNING
Danger of eye damage or headaches
LEDs generate a bundled light that can damage your eyes.
► Do not look into the LEDs from a short distance or for longer periods of time.