Inficon XL3000flex - Xl3000 Flexrc Only: Assemble Data Cable and CU1000

5 | Installation INFICON
32 / 108 XL3000flex-Operating-instructions-jina83en1-07-(2105)
1
Hang the holder with its hooks in the slots on the front of the device.
2
Press the holder against the front panel of the device.
ð The holder is pulled to the front panel of the device with a magnet on its rear.
3
When not in use, fix the sniffer line in the holder so that it points away from the
operator.
5.5 XL3000flexRC only: Assemble data cable and
CU1000