Inficon XL3000flex User Manual

INFICON Operation | 6
XL3000flex-Operating-instructions-jina83en1-07-(2105) 71 / 108
6.6 Recording data
The data is saved as a TXT file. Each TXT file contains the following information:
• Date created
• Software version
• Serial number
• Start time
• Time stamp (measurement indicates offset in seconds in relation to start time)
• File name
• Leak rate (expressed in selected unit)
• Pressure p1 (expressed in selected unit)
• Device status
Switching on/off
Switching data recording on/off
• Off
• On
Control unit Main Menu > Functions > Data >
Recorder > Settings > Data recording
Record interval
Time interval between data recordings
• 100 ms, 200 ms, 500 ms, 1 s, 2 s, 5 s
Control unit Main Menu > Functions > Data >
Recorder > Settings > Record interval
Memory location
The data stored in the control unit can be saved to a USB stick. The memory in the
control unit is limited to the recording of a 24-hour measurement.
• USB flash drive
• Control unit
Control unit Main Menu > Functions > Data >
Recorder > Settings > Storage location
Copy data
The data stored in the control unit can be saved to a USB stick. The memory in the
control unit is limited to the recording of a 24-hour measurement.
• USB flash drive
• Control unit
Control unit Main Menu > Functions > Data >
Recorder > Copy > Copy files
Deleting data
The data stored in the control unit can be saved to a USB stick. The memory in the
control unit is limited to the recording of a 24-hour measurement.
• USB flash drive

Inficon XL3000flex Specifications

General

Brand	Inficon
Model	XL3000flex
Category	Security Sensors
Language	English