Inficon XL3000flex - Page 27

INFICON Description | 4
XL3000flex-Operating-instructions-jina83en1-07-(2105) 27 / 108
Parameter Factory setting
Machine factor / Sniff factor 1.0 (for all masses)
Mass 4
Module on the I/O connection IO1000
Nominal state TMP On
calibration leak external SNIF 9.9 x 10
-2
calibration leak external VAC 9.9 x 10
-2
calibration leak internal 9.9 x 10
-2
Open calibration leak internal Off
Sniffer line detection On
Sniffer LED Alarm Configured Flashing
Sniffer light brightness 5
Sniffer beep Trigger
Sniffer button Flow On
Sniffer key ZERO On
Language English
Muting the beep Off
TMP rotation speed 1000
Trigger level 1 (2, 3, 4) 2 x 10
-4
mbar l/s
(1 x 10
-5
) mbar l/s
Preamplifier test at CAL On
Maintenance warning TMP and diaphragm pump
ZERO with start On
ZERO mode Suppress everything