17
Smart tip: Partial and Point location can
be fine tuned by using the Adjust setting.
Press and hold arrow up or arrow down
buttons to control the location of the back
mechanism.
Maximum 4D Level
Use this control to increase or decrease the maximum intensity of the 4D back mechanism
that works the back and shoulder regions. All auto massages are pre-programmed to have
varying 4D intensity, this setting will set the upper limit of these fluctuations. 1 = light, 5 =
firm, or Off. Tap screen to select setting.
Time Remaining
Tap screen to select your desired massage timer length; 10 minutes, 20 minutes, or 30
minutes. 20 minutes is the default setting. The massage chair will turn off automatically and
reset after the timer is up.
Foot Rollers & Calf Oscillation
Control Total Sole Reflexology™ Foot Rollers and
Complete Calf
™
Calf Rollers & Oscillation.
Choose your desired speed: 1 = slow, 2, 3 = fast, or Off (deactivate foot rollers).
Tap screen to
select setting.
Back Heat
Activate back heat and choose your desired heat intensity level: 1 = low, 2, 3 = high, or Off
(deactivate back heat).
Tap screen to select setting.
Air Settings
Choose your desired airbag region/s: Full, Arm & Shoulders, Back & Waist, Leg & Foot, or
Buttock. Tap screen to select setting. To turn a particular airbag region off, de-select the
activated region. Selecting Full will over ride any selections and ALL airbags become active.
Max Air Intensity
Increase or decrease maximum intensity of airbag massage. All auto massages are pre-
programmed to have varying levels of airbag intensity, this setting will set the upper limit of
these fluctuations. 1 = light, 5 = firm, or Off. Tap screen to select setting.
To Next Page
Loading...
