InFocus IN3118HD - SETUP >> Basic Menu Settings

DLP Projector – User’s Manual
SETUP>>Basic Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
SETUP>>Basic menu. Press the cursor ▲▼ button to move up and down in the
SETUP>>Basic menu. Press ◄► to change values for settings.
ITEM DESCRIPTION
Language
Press the cursor ◄► buttons to select a different localization menu.
(Range: English/ Français/ Español/ Deutsch/ Português/ 簡体中文/ Italiano/
Nederlands/ Svenska/ Русский/ Dansk/ Bahasa Indonesia/ 한국어)
Splash Logo
Press the cursor ◄► buttons to select a different startup screen.
(Range: InFocus/ Blue/ Black)
Projection
Press the cursor ◄► buttons to choose from four projection methods:
Front Table/ Front Ceiling/ Rear Table/ Rear Ceiling.
Blank Timer
Press the cursor ◄► buttons to set the Blank Screen timer. The projected image is
automatically restored after the set time.
(Range: Disable/ 5 min/ 10 min/ 15 min/ 20 min/ 25 min/ 30 min)
Auto Power Off
Press the cursor ◄► buttons to set the Auto Power Off timer. The projector automati-
cally turns off if no input source is detected after the preset period of time.
(Range: Disable/ 5 min/ 10 min/ 15 min/ 20 min/ 25 min/ 30 min)
Sleep Timer
Press the cursor ◄► buttons to set Sleep timer. The projector automatically turns off
after the preset period of time.
(Range: Disable/ 30 min/ 1hr/ 2hr/ 3hr/ 4hr/ 8hr/ 12hr)
Background Color
Press the cursor ◄► buttons to select the background color when no input source is
detected.
(Range: Purple/ Black/ Blue)
Menu Settings
Press the ENTER/SELECT button to enter the Menu Settings sub menu. See Menu
Settings on page 22.
Source
Press the ENTER/SELECT button to enter the Source sub menu. See Source on
page 22.
Lan Control Set-
tings
Press the ENTER/SELECT button to enter the Lan Control Settings sub menu.
See Lan Control Settings on page 23.
– 21 –