IN5312/IN5314 – User’s Manual
If more than one input device is connected, press the SOURCE button and use ▲▼ to
scroll among devices.
4.
• VGA 1 : Analog RGB
• VGA 2 : Analog RGB
• BNC : Analog / serial digital interface video inputs
• HDMI : High Definition Multimedia Interface
• DVI : DVI
• Component Video: DVD input YCbCr / YPbPr, or HDTV input YPbPr via HD15
connector
• S-Video: Super video (Y/C separated)
•
Composite Video: Traditional composite video
5.
To turn the projector off, press the
Power OFF button on the remote.
When the “Power Off? / Press
Power again” message appears,
press the POWER button twice. The
projector turns off.
Caution:
1. Be sure to remove the lens cap before starting projector.
2. Do not unplug the power cord until the READY LED stops flashing–indicating the projector has
cooled down.
– 13 –
To Next Page
Loading...
Need help?
General
