User’s Manual
Setting an Access Password (Security Lock)
You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector.
When enabled, the password must be entered after you power on the projector. (See Navigating the
OSD on page 21 and Setting the OSD Language on page 22 for help on using OSD menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact InFocus at www.infocus.com/support.
1.
Press the MENU button to open the
OSD menu.
2.
Press the cursor ◄► button to move
to the Installation I menu, press the
cursor ▲▼ button to highlight Ad-
vanced. Press the Select button or
right arrow button to select the
Advanced menu.
3.
Press the cursor ▲▼ button to select
Security Lock.
4.
Press the cursor ◄► button to enable
or disable security lock function.
A password dialog box automatically
appears.
– 14 –
To Next Page
Loading...
Need help?
General
