IN5312/IN5314 – User’s Manual
5.
Use the arrow buttons ▲▼◄►
on either the keypad or remote control
to enter a password. Any combination
can be used, including the same arrow
button, but you must use a
combination of five arrow button
presses.
Push the MENU button to exit the
dialog box.
6.
The password confirm menu appears
when the user powers on the projector
and the Security Lock feature is
enabled.
Enter the password in the order you
set it at step 5. In case you forget the
password, please contact InFocus at
www.infocus.com/support
.
The service center will validate the
owner and help reset the password.
– 15 –
To Next Page
Loading...
Need help?
General
