Ingenico APOS A8 - Installing Modules and Cards

APOS A8
05/18
Copyright© 2018 Ingenico
All rights reserved
13
Close the trapdoor
Turn the terminal and
remove the trapdoor.
4_2 Installing modules
4_2_1 SAM1 / SAM2 / SIM
Switch off the terminal before opening the trapdoor.
WARNING
The SAM/SIM connectors are located inside the terminal, in a closed
compartment.
SAM1, SAM2 and SIM are
identied by the engraved
marks on the lower
housing.
When introducing a SAM/
SIM in its slot, be sure
to put the cut corner as
indicated on the picture.