Ingenico APOS A8 - APOS A8 Terminal Usage; Powering the Terminal On and Off

APOS A8
05/18
Copyright© 2018 Ingenico
All rights reserved
9
3_1 Power on/Power off the terminal
3_Use of the terminal
Before using the terminal, always check if the roll of paper
is present.
ADVICE
To power on: Make sure the terminal battery is correctly installed and
Press <Power> button for about 1s until the display is turned up.
To power off: Press <Power> button for more than 2s until the display
show the following gure, then press <Power off>.
If the battery is empty, the terminal automatically shuts off.
Abnormal power off :
When the device works abnormally, for example, it is crashed and no
actions menu popped out while pressing the power button, please
long-press the power button for 6s, the device will be automatically
powered off.
Screen saver mode :
Short-press the power button for about 0.5s, the terminal display will
be turned on or off.