APOS A8
05/18
Copyright© 2018 Ingenico
All rights reserved
24
5_4 Cleaning the terminal
Unplug all the wires from terminal.
Good rules for proper cleaning of the terminal are:
Use a soft cloth that is very slightly soaked with soapy water to
clean the outside of terminal.
Do not clean the electrical connections.
Do not use in any case, solvents, detergents or abrasive products:
Those materials might damage the plastic or electrical contacts.
Avoid exposing the terminal to the direct rays of the sun.
Do not put anything into the slot of the smart card reader.
5_5 Transport and storage
Adopt general transportation mode, and prevent the goods from
sunlight, snow, shower and mechanical impact. Transport the devices
with care, do not throw it forcibly. Prevent the packaging from
extrusion during transportation, to avoid breakage.
The product should be stored in the original packing box. The
warehouse is not allowed to have all sorts of harmful gases,
inammable, explosive, corrosive chemical goods, strong mechanical
vibration and strong magnetic eld. Packing box should be at least
15cm above the ground, and be away from heat, cold, window or air
inlet source at least 50cm.
To Next Page
Loading...
Need help?
General
